Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor on the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Tire pressure warning light

Today we will discover the necessary steps on how to reset the tire pressure monitoring system (TPMS) light of the Fiat 500; before performing the reset, it is necessary that all four tires are at the correct pressure. So, we get into the car and turn on the instrument panel; we press the settings button to enter the onboard computer, scrolling with the plus and minus buttons until we reach the tire pressure option, as shown in the video. At this point, we follow the guided procedure and confirm the reset of the TPMS light!

Posted on 12 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Fiat 500X
How to reset the tire pressure warning light on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) Following these simple instructions, we will see how to reset the tire pressure monitoring system (TPMS) light on the Fiat 500X; before performing th…
How to reset the TPMS light on the Fiat 500
How to reset the TPMS light on the Fiat 500
Fiat 500 (2007-2024 / 312) When the TPMS warning light comes on in the Fiat 500, it means we need to check the tire pressure of our vehicle and only then perform the reset of t…
How to reset the tire pressure warning light on the Fiat 500
How to reset the tire pressure warning light on the Fiat 500
Fiat 500 (2007-2024 / 312) Today's guide will allow us to reset the tire pressure warning of the Fiat 500; before performing the TPMS sensor reset, it is necessary for all four…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2021 - What does the Fiat 500 tire pressure warning light mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos