Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the dipped beam headlight bulb on the Iveco Ducato X250

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

If one of the front headlight bulbs on the Iveco Ducato burns out, for your safety, you must replace it as soon as possible. First, open the bonnet, unscrew the four screws on the upper edge of the trim with the logo, and remove it. Next, remove the two screws that secure the headlight containing the bulb to be replaced, disconnect the connector, and bring the headlight to a work surface.

Release the two metal clips, open the cover to access the bulb holders, remove the metal clip from the bulb to be changed, pull out the connector, and replace the old bulb with a new one. Reconnect the connector, secure it in its housing, replace the cover, and secure it. Insert the headlight back in place by screwing in the screws, then refit the trim and secure it.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Change the Dipped Beam Bulb on the Fiat Ducato - Peugeot Boxer
Fiat Ducato (2006-2014 / X250) Today, you will learn how to remove and replace the dipped beam bulb of the front headlamp on the Fiat Ducato, as well as the Peugeot Boxer. First, o…
Removing the Front Headlight on a Fiat Ducato Camper x250
Removing the Front Headlight on a Fiat Ducato Camper x250
Fiat Ducato (2006-2014 / X250) In today's video, we will see how to remove the front headlight on a Fiat Ducato Camper x250, following the instructions below. First, open and lift …
Replacing the Position Light Bulb of the Fiat Ducato X250
Replacing the Position Light Bulb of the Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) Let's see how to replace the position light bulb of the Fiat Ducato when it burns out. Open the front bonnet and position yourself near the headlamp …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos