Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Dipped Beam Bulb on the Fiat Ducato - Peugeot Boxer

Model: Fiat Ducato X250 - Years 2006-2014
Part: Headlight bulb

Today, you will learn how to remove and replace the dipped beam bulb of the front headlamp on the Fiat Ducato, as well as the Peugeot Boxer. First, open the bonnet and begin by removing the plastic cover protecting the bulbs, located behind the headlamp; then remove the plastic cover found under the headlamp to unscrew all the screws, as shown in the video. Now disconnect the electrical connector for the bulbs and unclip the metal spring to remove it and replace it with a new one, specifically an H7 bulb.

Updated on 18 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Headlamp Bulb on a Fiat Ducato - Peugeot Boxer
How to Replace the Headlamp Bulb on a Fiat Ducato - Peugeot Boxer
Fiat Ducato (2014-2026 / X290) .. the headlamp bulb on a Fiat Ducato, as well as a Peugeot Boxer. First, open the bonnet and start unscrewing the fixing screws of the headlamp, located.. …
How to Replace the Starter Motor on the Fiat Ducato - Peugeot Boxer
How to Replace the Starter Motor on the Fiat Ducato - Peugeot Boxer
Fiat Ducato (2014-2026 / X290) .. motor on the Fiat Ducato x290, as well as on the Peugeot Boxer. First, disconnect the battery terminals; then lift the vehicle and unscrew the fixing.. …
Removing the Car Radio from Fiat Ducato, Peugeot Boxer
Removing the Car Radio from Fiat Ducato, Peugeot Boxer
Fiat Ducato (2014-2026 / X290) .. the car radio in a Fiat Ducato, as well as in a Peugeot Boxer. First, pry on the sides of the car radio and, using the extraction tools inserted into.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos