Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Fiat Ducato - Peugeot Boxer

Model: Fiat Ducato X290 - Years 2014-2026
Part: Starter motor

In this brief guide, you will see the main steps to remove and replace the starter motor on the Fiat Ducato x290, as well as on the Peugeot Boxer. First, disconnect the battery terminals; then lift the vehicle and unscrew the fixing bolts of the starter motor using a socket spanner, as shown in the video. At this point, remove the power wiring to completely detach the starter from the engine; once removed, you can replace it with the new one by applying the reverse procedure!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the starter motor located in the Fiat Ducato van?
Where is the starter motor located in the Fiat Ducato van?
Fiat Ducato (2006-2014 / X250) In this video, you can see where the starter motor is located in the Fiat Ducato van and how to proceed if you need to replace it, a very simple oper…
Removing the Car Radio from Fiat Ducato, Peugeot Boxer
Removing the Car Radio from Fiat Ducato, Peugeot Boxer
Fiat Ducato (2014-2026 / X290) .. the car radio in a Fiat Ducato, as well as in a Peugeot Boxer. First, pry on the sides of the car radio and, using the extraction tools inserted into.. …
How to replace the oil pressure sensor of the Fiat Ducato 2.3D
How to replace the oil pressure sensor of the Fiat Ducato 2.3D
Fiat Ducato (2006-2014 / X250) Today we will see the main information that will allow us to disassemble and replace the oil pressure sensor of the Fiat Ducato 2.3D engine. First, r…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - Where is the starter motor located in a Fiat Ducato? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos