Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil pressure sensor of the Fiat Ducato 2.3D

Model: Fiat Ducato X250 - Years 2006-2014

Today we will see the main information that will allow us to disassemble and replace the oil pressure sensor of the Fiat Ducato 2.3D engine. First, raise the vehicle and start disassembling and removing the starter motor, unscrewing the fixing screws and disconnecting the electrical connector; in this way it will be possible to access the oil pressure sensor, unscrewing and removing it, as shown in the video. At this point, install the new original oil pressure sensor, making the electrical connection, and finally reassemble the starter motor!

Posted on 27 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the oil level sensor of a Fiat Ducato
Replacement of the oil level sensor of a Fiat Ducato
Fiat Ducato (2014-2026 / X290) In this video, we will see how to replace the oil level sensor of the Fiat Ducato; it is used to constantly monitor the amount of oil in the engine: …
How to Replace the Reverse Sensor on a Fiat Ducato (2005)
How to Replace the Reverse Sensor on a Fiat Ducato (2005)
Fiat Ducato (2002-2006 / ) In this video, we will see how to remove and replace the reverse sensor or switch on a 2005 Fiat Ducato with a 2.8 JTD engine. First, open the bonnet…
What does the engine oil light mean on a Fiat Ducato?
What does the engine oil light mean on a Fiat Ducato?
Fiat Ducato (2014-2026 / X290) The oil pressure light on a Fiat Ducato indicates a problem related to the engine lubrication system. This could indicate that the oil level is low o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos