Do it yourself
Frequently asked questions about cars and motorcycles

How do you remove the starter motor in a Fiat Ducato 2016?

Model: Fiat Ducato X290 - Years 2014-2026
Part: Starter motor

Start by disconnecting the battery for safety. Then, locate the starter motor: it is located near the gearbox, underneath the vehicle. You may need to lift the van with a jack and place it on stands. Disconnect the electrical cables (make a mark on where they go to make reassembly easier). Unscrew the mounting bolts, being careful because the starter motor is quite heavy. Once removed, check the new starter motor before installing it. Reassemble everything following the steps in reverse, making sure to tighten the bolts and reconnect the battery. Try to start the car; if the engine runs smoothly, it means everything is in order. If not, contact a mechanic.

Posted on 24 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat Ducato (2014-2026 / X290) In this brief guide, you will see the main steps to remove and replace the starter motor on the Fiat Ducato x290, as well as on the Peugeot Boxer. Fi…
Fiat Ducato (2014-2026 / X290) In this video, you can see where the starter motor is located in the Fiat Ducato van and how to proceed if you need to replace it. As shown, the star…
Fiat Ducato (2006-2014 / X250) In this video, you can see where the starter motor is located in the Fiat Ducato van and how to proceed if you need to replace it, a very simple oper…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - Where is the starter motor located in a Fiat Ducato? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos