Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor from a Fiat Ducato Maxi?

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Starter motor

Like all mechanical and electrical components installed in a vehicle, the starter motor wears out over time and needs to be serviced or replaced. This is the case for removing the starter motor from the vehicle in question, as shown in the accompanying video. First, lift the floor panel of the cabin and disconnect the two battery terminals. Proceed from underneath the vehicle, specifically under the engine, where the aforementioned starter motor is located, first removing the electrical power cables and then the securing pins. For both operations, it is recommended to use socket spanners.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on the Fiat Ducato - Peugeot Boxer
How to Replace the Starter Motor on the Fiat Ducato - Peugeot Boxer
Fiat Ducato (2014-2026 / X290) In this brief guide, you will see the main steps to remove and replace the starter motor on the Fiat Ducato x290, as well as on the Peugeot Boxer. Fi…
Where is the starter motor located in the Fiat Ducato van?
Where is the starter motor located in the Fiat Ducato van?
Fiat Ducato (2006-2014 / X250) In this video, you can see where the starter motor is located in the Fiat Ducato van and how to proceed if you need to replace it, a very simple oper…
Where is the starter motor located in the Fiat Ducato van?
Where is the starter motor located in the Fiat Ducato van?
Fiat Ducato (2014-2026 / X290) In this video, you can see where the starter motor is located in the Fiat Ducato van and how to proceed if you need to replace it. As shown, the star…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - Where is the starter motor located in a Fiat Ducato? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos