Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the position light lamp of the Fiat Ducato X250

Model: Fiat Ducato X250 - Years 2006-2014
Part: Headlight bulb

Let's see how to replace the position light bulb of the Fiat Ducato, in case it burns out. Open the front hood and position yourself near the headlight where the bulb to be replaced is located, unscrew the screw above the headlight, unscrew the four screws above the grille and detach it. This way we have access to the screw at the base of the headlight, once unscrewed we detach the headlight from its housing; turn it over and open the section to access the position light, remove the bulb holder and remove the burnt bulb. Insert a new 5W bulb and put it back in the headlight. Reassemble everything by following the steps in reverse.

Posted on 28 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the low beam headlight bulb of the Iveco Ducato X250
Replacement of the low beam headlight bulb of the Iveco Ducato X250
Fiat Ducato (2006-2014 / X250) If one of the lamps in the front headlight of the Iveco Ducato were to burn out, for our safety, we must replace it as soon as possible. First, we op…
Replacement and Cost of the Front Driveshaft for the Fiat Ducato X250
Replacement and Cost of the Front Driveshaft for the Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) This guide provides the main instructions on the cost and replacement of the front driveshaft for the Fiat Ducato X250. Replacing the front driveshaf…
Replacing the Radiator Fluid on the Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) In this guide, we will discover how to replace the coolant in the Fiat Ducato X250 in simple steps. First, open the bonnet and start by removing the …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos