Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement and Cost of the Front Driveshaft for the Fiat Ducato X250

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Axle shaft

See other generations:
Video tutorial

This guide provides the main instructions on the cost and replacement of the front driveshaft for the Fiat Ducato X250. Replacing the front driveshaft is not a routine task; it should be replaced when its parts wear out, causing issues and noises during driving.

Prices for driveshaft replacement vary based on the quality of the replacement part and labour; typically, expect to spend between £85 and £130 for the driveshaft alone, with similar costs for labour.

The video demonstrates how to also replace the driveshaft gaiter.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

Replacing the Radiator Fluid on the Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) In this guide, we will discover how to replace the coolant in the Fiat Ducato X250 in simple steps. First, open the bonnet and start by removing the …
Removing the Front Headlight on a Fiat Ducato Camper x250
Removing the Front Headlight on a Fiat Ducato Camper x250
Fiat Ducato (2006-2014 / X250) In today's video, we will see how to remove the front headlight on a Fiat Ducato Camper x250, following the instructions below. First, open and lift …
How to Replace the Cabin Filter in the Fiat Ducato
How to Replace the Cabin Filter in the Fiat Ducato
Fiat Ducato (2006-2014 / X250) In this new mini guide for all Fiat Ducato x250 owners, we will discover where the cabin air filter is located and how to replace it. Go inside the v…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos