Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator Fluid on the Fiat Ducato X250

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Antifreeze coolant

See other generations:
This video is currently unavailable

In this guide, we will discover how to replace the coolant in the Fiat Ducato X250 in simple steps. First, open the bonnet and start by removing the front grille of the bumper by unscrewing the fixing screws; then remove the cover of the radiator, as shown in the video.

At this point, remove the drain plug of the radiator using pliers; let it drain into a container. Finally, pour the new fluid into the reservoir, filling it to the maximum level!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Replacement and Cost of the Front Driveshaft for the Fiat Ducato X250
Replacement and Cost of the Front Driveshaft for the Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) This guide provides the main instructions on the cost and replacement of the front driveshaft for the Fiat Ducato X250. Replacing the front driveshaf…
Instructions for Removing the Heater Radiator on Fiat Ducato 3
Instructions for Removing the Heater Radiator on Fiat Ducato 3
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will learn how to remove the heater radiator from a third-generation Fiat Ducato, following these main instructions. Firs…
Replacing Indicator Bulb in Fiat Ducato x250 Wing Mirror
Fiat Ducato (2006-2014 / X250) In today's tutorial, you will learn how to remove the indicator bulb from a Fiat Ducato x250. The video shows the mirror disassembled: first, unscrew…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos