Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Heater Radiator on Fiat Ducato 3

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Heater core

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the heater radiator from a third-generation Fiat Ducato, following these main instructions. First, get inside the vehicle and remove the lower dashboard panel; the radiator is located just behind the pedal area.

Now, remove all the plastic supports by unscrewing the screws, and disconnect any electrical connectors; access the engine bay to disconnect the radiator hoses, allowing all the fluid to drain. All that’s left is to extract the radiator from inside the vehicle.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Heater Radiator on the Fiat Ducato
Guide to Replacing the Heater Radiator on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) This guide provides instructions for removing and replacing the heater radiator in the Fiat Ducato's cabin. First, get inside the vehicle and start b…
Guide on How to Remove the Heating Radiator of the Fiat Ducato 230
Guide on How to Remove the Heating Radiator of the Fiat Ducato 230
Fiat Ducato (1981-1994 / ) In this guide, find the essential instructions to help you remove and replace the internal heating radiator of the Fiat Ducato 230, first generation.…
How to Replace the Heating Radiator of a Fiat Ducato
How to Replace the Heating Radiator of a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. Start by disconnecting the two hoses that lead to the heating radiator, located near the fire …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos