Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide on How to Remove the Heating Radiator of the Fiat Ducato 230

Model: Fiat Ducato - Years: 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992
Part: Heater core

See other generations:
Video tutorial

In this guide, find the essential instructions to help you remove and replace the internal heating radiator of the Fiat Ducato 230, first generation. First, open the bonnet and disconnect the radiator fluid pipes, allowing it to drain into a container; then, get inside the vehicle to remove the glove compartment by unscrewing all the screws found on the sides.

At this point, disconnect the pipes from the radiator to remove it; simply replace it with the new one and reassemble everything!


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Heater Radiator on the Fiat Ducato
Guide to Replacing the Heater Radiator on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) This guide provides instructions for removing and replacing the heater radiator in the Fiat Ducato's cabin. First, get inside the vehicle and start b…
Guide to Replacing the Heating Radiator on a Fiat Ducato 2.8 TD
Guide to Replacing the Heating Radiator on a Fiat Ducato 2.8 TD
Fiat Ducato (1993-2016 / MK 2) This guide provides the main instructions for removing and replacing the cabin heating radiator on a Fiat Ducato 2.8 TD. First, open the bonnet of yo…
Instructions for Removing the Heater Radiator on Fiat Ducato 3
Instructions for Removing the Heater Radiator on Fiat Ducato 3
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will learn how to remove the heater radiator from a third-generation Fiat Ducato, following these main instructions. Firs…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos