Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Heating Radiator on a Fiat Ducato 2.8 TD

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Heater core

This guide provides the main instructions for removing and replacing the cabin heating radiator on a Fiat Ducato 2.8 TD. First, open the bonnet of your car and begin draining the coolant; then, get inside the vehicle to remove the glove compartment and the dashboard located on the passenger side, as shown in the video. At this point, disconnect the inlet and outlet pipes from the heat exchanger, allowing any excess fluid to drain; unscrew the radiator bracket screws to remove it and replace it with the new one!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Heater Radiator on the Fiat Ducato
Guide to Replacing the Heater Radiator on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) This guide provides instructions for removing and replacing the heater radiator in the Fiat Ducato's cabin. First, get inside the vehicle and start b…
Guide on How to Remove the Heating Radiator of the Fiat Ducato 230
Guide on How to Remove the Heating Radiator of the Fiat Ducato 230
Fiat Ducato (1981-1994 / ) In this guide, find the essential instructions to help you remove and replace the internal heating radiator of the Fiat Ducato 230, first generation.…
How to Replace the Heating Radiator of a Fiat Ducato
How to Replace the Heating Radiator of a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. Start by disconnecting the two hoses that lead to the heating radiator, located near the fire …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos