Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight of the Fiat Fiorino

Model: Fiat Fiorino MK 2 - Years 1988-2014
Part: Headlight

These short and simple steps will show us how to disassemble and replace the front headlight of the Fiat Fiorino, following the instructions below. First, we open the hood of the car and start unscrewing the fixing screws of the front headlight, using a 10mm socket wrench; we gently detach the bumper on the sides to access the lower screw, as shown in the video. At this point, we disconnect the electrical connector of the bulbs to remove and replace the optical group with the new one, applying the reverse process for reassembly!

Posted on 31 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light Bulb on a Fiat Fiorino
Replacing the Rear Light Bulb on a Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) Replace the rear light bulb on a Fiat Fiorino. Remove the light unit from the rear panel. Use a plastic lever to detach the number plate light unit. …
How do you reset the Service light on the Fiat Fiorino?
How do you reset the Service light on the Fiat Fiorino?
Fiat Fiorino (2007-2026 / MK 3) In order to reset the Service light of the Fiat Fiorino, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found…
Where are the fuses located in the Fiat Fiorino?
Where are the fuses located in the Fiat Fiorino?
Fiat Fiorino (2007-2026 / MK 3) Inside the Fiat Fiorino, all the fuses are contained in the box that is installed on the vehicle: in this type of vehicle there is indeed a single bo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos