|
Do it yourself
| |||
| ||||
How to disassemble the rear headlight of a Fiat Punto?
Model: Fiat Punto
199, MK 3, Grandepunto , Punto EVO
- Years 2005-2018
To remove the rear light of a Fiat Punto, begin by turning off the engine and opening the trunk. Locate the clips or screws that secure the rear light, which are usually inside the trunk, near the mounting point of the light. Use an appropriate screwdriver or wrench to remove these clips or screws. Once removed, carefully grab the light and pull it outwards, being careful not to damage the electrical connections. Disconnect the electrical connector that powers the light by pressing on the release tab and pulling the connector. At this point, the rear light should be completely free and you can remove it from the vehicle. If you need to replace the bulb or repair the light, perform the necessary operations and then reassemble the light following the steps in reverse order, ensuring that the electrical connector is securely connected and that the clips or screws are tightened.
Posted on 16 June 2024 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
Today we will see, in this video tutorial, how to remove and replace the rear light of the Fiat Punto Evo, but also of the Grande Punto. First of all…
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
In today's video tutorial we will see the steps on how to remove and replace the rear fog light bulb on the Fiat Grande Punto, but also on the Punto …
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
In order to replace the rear headlight bulb of the Fiat Punto, you need to open the rear hatch so that you can access the screws that secure the rear…
Other guides you may be interested in
|
How to Remove the Front Seats from a Classic Fiat 500
How to remove the front seats from a classic Fiat 500? In this video, follow these steps: first, slide the seats forward and lift them up, then unscrew the retaining bolts on the rails fixed to the car's chassis using a socket or impact driver (use appropriate release agents if the bolts do not unscrew). Remove the retaining bolts at the bottom of the car (use spanners on both the upper and lower parts of the connecting bolts). Finally, install the new front seat by following the disassembly steps mentioned earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.076
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |