Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the fuel tank cap of the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2024
Part: Fuel cap

Today's instructions will show us how to open the fuel tank cap and the fuel door of the Fiat 500. First, let's move to the side and start by opening the fuel door; using the ignition key, we will rotate the lock cylinder to unscrew the fuel tank cap counterclockwise, as shown in the video. At this point, replace the fuel tank cap or its gasket if necessary; after refueling, we will close the cap and turn the lock, finally closing the fuel door!

Posted on 21 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to open the gas tank cap on the Fiat 500
How to open the gas tank cap on the Fiat 500
Fiat 500 (2007-2024 / 312) Whether your Fiat 500 is normal or Abarth, opening the fuel tank cap is a simple and quick operation to be carried out in a few seconds, allowing you…
How to Open the Fuel Cap on a Fiat 500
How to Open the Fuel Cap on a Fiat 500
Fiat 500 (2007-2024 / 312) Want to refuel your car yourself? Here’s how to open and close the fuel cap on a Fiat 500. First, open the fuel flap located on the right side of the…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos