Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator on a Fiat

Model: Fiat Ulysse MK 2 - Years 2002-2010
Part: Alternator

Begin by releasing the bonnet from the appropriate lever and lifting it, securing it with the prop rod. Next, disconnect the battery terminals to protect any delicate circuits. Remove the belt by rotating the tensioner pulley clockwise. Disconnect the connectors attached to the alternator to free it from any components installed on it, then remove the bolts securing it to extract it properly, making space between the various conduits. Finally, retrace the steps described for reassembly of the components.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Remote Battery in a Fiat Ulysse
Replacing the Remote Battery in a Fiat Ulysse
Fiat Ulysse (2002-2010 / MK 2) To replace the battery of the remote for generic Fiat cars (including the Fiat Ulysse), you need to access the battery housing. To perform this opera…
How to Open the Bonnet on the Fiat Ulysse?
How to Open the Bonnet on the Fiat Ulysse?
Fiat Ulysse (2002-2010 / MK 2) In this short tutorial, you will see how to open the bonnet on the Fiat Ulysse, a very simple operation that follows the standard procedure, except f…
What is the Fuse Diagram for a Fiat Ulysse?
What is the Fuse Diagram for a Fiat Ulysse?
Fiat Ulysse (2002-2010 / MK 2) The video accompanying this article shows the complete fuse diagram for a Fiat Ulysse. The fuse box is located inside the glove compartment, on the r…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos