Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Uno
    4. : 1983-1995 (MK 1)

Fiat Uno Years 1983-1995 (MK 1)

Fiat Uno (1983-1995 / MK 1)
Replacement of the timing belt on a Fiat Uno.
Through this useful video, we can see all the necessary steps to replace the timing belt on a Fiat Uno, first-generation model with a FIRE engine without …read all…
Posted on 30 November 2023 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
How to remove the central panel of the dashboard of the Fiat Uno?
In order to remove the central panel of the dashboard of the Fiat Uno, the drawer in the compartment above the panel must be opened and the drawer removed. …read all…
Posted on 4 May 2024 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
Disassembly of the Fiat Uno Fire fuel pump
In today's video guide we will see how to remove and replace the fuel pump of a Fiat Uno Fire, following these main instructions. First we go to the rear of …read all…
Posted on 29 March 2024 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
Removing the starter motor on Fiat Uno Fire
In this video tutorial we will see how to disassemble and replace the starter motor on a Fiat Uno with Fire engine, following these simple steps. First we open …read all…
Posted on 22 January 2024 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
Disassembly of the rear light Fiat Uno
In this video tutorial we will see how to remove the rear light of a Fiat Uno, following these simple steps. First we open the boot lid and disconnect the …read all…
Posted on 7 January 2024 by ScegliAuto
Fiat Uno (1983-1995 / MK 1)
Quick assembly of oil pan
Fitting the oil pan could appear to be a complex and delicate operation but in reality it is a simple practice to carry out even without resorting to a …read all…
Posted on 26 June 2023 by ScegliAuto
Timing belt (1) -board computer (1) Checks and maintenance (2) Oil pan (1) Dashboard (1) Tail light (1) Starter motor (1) Fuel pump (1) Fuse box (2)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos