Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Dashboard Panel of a Fiat Uno?

Model: Fiat Uno MK 1 - Years: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994
Part: Dashboard

See other generations:
This video is currently unavailable

To remove the centre dashboard panel of a Fiat Uno, open the glove compartment located above the panel and remove it. Underneath, there will be screws that need to be loosened to completely remove it, after disconnecting the connector. Once the glove compartment is removed, you will need to pull out the rivets from the top of the panel to access the fan controls.

Below, there will be more screws to loosen to remove the panel, along with those located at the bottom, on the right and left sides. Once all these screws have been loosened, you can remove the panel and disconnect the connectors.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Fiat Uno?
How to Reset the Service Light on a Fiat Uno?
Fiat Uno (2010-2021 / Nuovouno , Type327) To reset the Service light on a Fiat Uno, connect a diagnostic tool to the vehicle's OBD port: on this model, it is located at the bottom left of the…
How do you reset the Service light of the Fiat Uno?
How do you reset the Service light of the Fiat Uno?
Fiat Uno (2010-2021 / Nuovouno , Type327) To reset the Service light that appears on the instrument panel of the Fiat Uno, you will need to connect a diagnostic tool to the OBD port of the ve…
Engine Temperature Monitoring on the Fiat Uno Way Dashboard
Engine Temperature Monitoring on the Fiat Uno Way Dashboard
Fiat Uno (2010-2021 / Nuovouno , Type327) In this video, we can see the maximum indication of the instruments on the Uno Way. This vehicle, which has nothing in common with the model released…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos