Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Uno
    4. : How do you reset the Service light on the Fiat Uno?

Fiat Uno - Video tutorial

Model: Fiat Uno Nuovouno , Type327 - Years 2010-2021
Part: Checks and maintenance
Operation: How do you reset the Service light on the Fiat Uno?

In order to reset the Service light on the Fiat Uno, you need to connect a diagnostic tool to the OBD port of the vehicle: on this car model, it will be located on the lower left side of the dashboard compared to the steering column. Once the scanner is connected, you can select the specific car model and its corresponding version; once this is identified, you need to follow the instructions to reset the error that triggers the light. Then you can disconnect the scanner and check that the light has completely disappeared.


Posted on 5 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Uno 1983-1995 - What does the Fiat Uno rear fog light warning light indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos