Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Ford Transit

Model: Ford Transit Custom - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear headlamp bulb on a Ford Transit is a quick and easy task to do yourself. To start the bulb replacement, open the left boot lid and move the securing lever.

Next, remove the screws around the headlamp near the internal seal and disconnect the headlamp connector to remove it. Open the light unit and replace the bulb, then proceed to reassemble the headlamp by reversing the steps. Position the headlamp and screw in the screws, then reconnect the connector and close the boot to test the light's operation.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Ford Transit
How to replace the rear headlight bulb of the Ford Transit
Ford Transit (2012-2024 / Custom) Today we will explain how to replace the bulb in the rear headlight of the 2022 Ford Transit model. To perform this operation, we need to open the tr…
How to Replace the Rear Headlight Bulb on a Ford Transit
How to Replace the Rear Headlight Bulb on a Ford Transit
Ford Transit (2000-2006 / MK 6) To replace the rear headlight bulb on a Ford Transit, open the boot of the vehicle to access the two screws that secure the headlight from the inside…
How to Replace the Front Headlight Bulb on the Ford Transit
How to Replace the Front Headlight Bulb on the Ford Transit
Ford Transit (2014-2024 / MK 8) To replace the front headlight bulb on your Ford Transit, pay attention to the steps outlined in the following guide and apply them step by step. Fir…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos