Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Ford Transit

Model: Ford Transit Custom - Years 2012-2024
Part: Tail light bulb

Today we will explain how to replace the bulb in the rear headlight of the 2022 Ford Transit model. To perform this operation, we need to open the trunk doors and remove the side grilles. Disconnect the power cutter from the headlight. Using a screwdriver, remove the screws along the edges of the headlight in order to remove it. Open the ceiling cap and proceed with the replacement of the bulb. Once the new bulb is inserted, proceed with the assembly of the headlight. After mounting the headlight, connect the connector and test the operation of the bulb by turning on the vehicle lights.

Posted on 14 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Ford Transit
How to replace the rear headlight bulb of the Ford Transit
Ford Transit (2012-2024 / Custom) Replacing the rear headlight bulb on the Ford Transit is an easy and quick operation to perform independently. To begin the replacement of the bulb, …
How to Replace the Rear Headlight Bulb on a Ford Transit
How to Replace the Rear Headlight Bulb on a Ford Transit
Ford Transit (2000-2006 / MK 6) To replace the rear headlight bulb on a Ford Transit, open the boot of the vehicle to access the two screws that secure the headlight from the inside…
How to replace the front headlight bulb of the Ford Transit
How to replace the front headlight bulb of the Ford Transit
Ford Transit (2014-2024 / MK 8) If you want to replace the front headlight bulb of your Ford Transit by yourself, you need to pay attention to the steps described in the following g…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos