Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb in the Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Headlight bulb

This brief guide provides instructions for removing and replacing the dipped beam bulb in the front headlight of the Ford Transit. First, open the vehicle's bonnet and start unscrewing the headlight fixing screws, disconnecting the electrical connector for the lights to remove it; then remove the plastic protective cap of the bulbs, disconnecting the electronic connector to remove the dipped beam light, as shown in the video. At this point, install the new bulb of the correct type and with the same fitting; finally, reassemble the front headlight!

Posted on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on Ford Transit Mk7
How to Replace the Front Headlamp Bulb on Ford Transit Mk7
Ford Transit (2006-2014 / MK 7) In this guide, you will learn how to correctly replace the front headlamp bulb on your Ford Transit Mk7. Before starting, ensure the vehicle is turne…
How to replace the front headlight bulb of the 2015 Ford Transit
How to replace the front headlight bulb of the 2015 Ford Transit
Ford Transit (2012-2024 / Custom) Today we will explain how to replace the front headlight bulb of a 2015 Ford Transit. To perform this operation, we need to open the front hood and u…
How to replace the headlight bulb of the 2019 Ford Transit
How to replace the headlight bulb of the 2019 Ford Transit
Ford Transit (2014-2024 / MK 8) Replacing the front headlight bulb of the Ford Transit is an easily achievable task on your own, using just a few minutes of your time. After opening…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos