Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Sensor on a Ford Fusion

Model: Ford Fusion North America MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

See other generations:
Video tutorial

Today, let's see how to reset the tire pressure sensors on a Ford Fusion, a second-generation sedan produced from 2013 to 2020. Start by putting the vehicle into learning mode. To do this, press the brake pedal, then turn the ignition on and off twice.

Next, turn the ignition on a third time, press the brake pedal again, and then turn the vehicle off. Finally, turn the vehicle on and off three more times. After this, you will hear a chime indicating that the vehicle has entered learning mode.

At this point, use a reset tool, available for a small cost, for each tire sensor, starting with the one indicated on the vehicle's information display.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure warning light on a Ford Fusion?
How do you reset the tire pressure warning light on a Ford Fusion?
Ford Fusion North America (2006-2012 / MK 1) The tire pressure warning light displayed on the instrument panel of the Ford Fusion can be reset by first inflating the tires to the recommended pre…
How to Reset the TPMS Light on a 2019 Ford Fusion
How to Reset the TPMS Light on a 2019 Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) Resetting the tire pressure monitoring system (TPMS) light on a 2019 Ford Fusion is a simple task you can do yourself. Start the reset by pressing th…
How to reset the tire pressure light in the Ford Fusion?
How to reset the tire pressure light in the Ford Fusion?
Ford Fusion North America (2006-2012 / MK 1) In this tutorial we can see how to reset the tire pressure light in the Ford Fusion, a very simple and quick operation, to be done only once the corr…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos