Do it yourself
Frequently asked questions about cars and motorcycles

Which is the reverse light fuse in the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

Video tutorial
Detailed instructions - If the reverse light of our Ford Focus has suddenly stopped working and the bulbs are intact, we can first check the status of the corresponding fuse, the position of which is indicated in this video. As shown, the fuse in question is located in the box inside the cabin, specifically behind the passenger's glove compartment, which will need to be removed. It is a 10A fuse and is the fourth in the third column, looking at the box from the front. If it is faulty, make sure to use a replacement with equivalent specifications and operate with the vehicle turned off.

Posted on 12 November 2024 by ScegliAuto


Related tutorials

Ford Focus (1998-2004 / MK 1) In this tutorial, you will learn how to remove the rear light of the Ford Focus and replace the bulbs, including the reverse light bulb located in th…
Ford Focus (2004-2011 / MK 2, Focus 2) On this model of car, there are two fuse boxes. The first is located in the cabin under the dashboard on the left side of the steering wheel, while t…
Ford Focus (2011-2018 / MK 3) If the air conditioning in your Ford Focus has suddenly stopped working, first check the status of the relevant fuse, the location of which is indica…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to set the clock on the Vespa 125 Primavera?

To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Watch the video!


by ScegliAuto

More videos