Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the radio of the Ford Fiesta 6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Car stereo

In this new guide aimed at all of you who own a Ford Fiesta Mk6, we will explain the steps you need to take if you want to remove the factory radio. First of all, remove the small control panel located to the right of the radio and unscrew the screws with a crosshead screwdriver. Then open the passenger glove compartment and unscrew the screw located on the left side. At this point, remove the entire central plastic cover and pull the radio towards you. Finally, disconnect the electrical cable and the procedure is complete.

Posted on 14 November 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Radio from a Ford Fiesta
How to Remove the Radio from a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to remove the radio from a Ford Fiesta? Use original removal keys for the radio. Insert the keys into the holes on the plastic cover of the radio…
How to Remove the Radio from the Ford Fiesta
How to Remove the Radio from the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide shows you how to remove and replace the standard radio in the Ford Fiesta, following the instructions below. First, get inside the vehicle…
How to Remove the Original Radio from a Ford Fiesta
How to Remove the Original Radio from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Learn how to remove the original radio from a Ford Fiesta. First, use a plastic trim tool to remove the upper dashboard cover panel (as shown in the …

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos