Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

How do you replace the cabin pollen filter on a Ford Focus? Using a plastic lever, detach the cover located at the bottom of the dashboard (right side under the glove compartment). Get a screwdriver or a cordless drill, remove the cap from the filter housing, then extract the worn cabin filter.

Insert a new cabin filter ensuring it fits snugly around the walls of the housing, reattach the filter housing cap and tighten the screws (cover everything with the cloth placed under the dashboard). Check the correct installation of the previously mounted parts.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Removing the Cabin Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Replace the cabin filter on a Ford Focus Station Wagon. Use a plastic lever to detach the cover located at the bottom of the dashboard (left side und…
How to Replace the Pollen Filter on Ford Focus
How to Replace the Pollen Filter on Ford Focus
Ford Focus (2011-2018 / MK 3) .. How to replace the pollen filter on a Ford Focus? Follow these steps for removal: use a plastic lever.. …
How to replace the cabin filter of the Ford Focus
How to replace the cabin filter of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the pollen filter of the Ford Focus, go to the lower part where the pedals are located, and unscrew the 3 nuts holding the accelerator ped…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos