Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the cabin air filter on a Ford Focus.

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Cabin air filter
Operation: How to replace the cabin air filter on a Ford Focus.

To replace the pollen filter of the Ford Focus, go to the lower part where the pedals are located, unscrew the 3 nuts that hold the accelerator pedal with a 10mm socket wrench. After unscrewing the nuts, move the accelerator pedal without disconnecting the connector. Then, unscrew the 3 bolts that hold the pollen filter cover with a 7mm socket wrench and remove it. Once the cover is removed, take out the old pollen filter. Now, take the new pollen filter out of its packaging and position it in the same way as the old one. Replace the cover, screw it back in (the lower bolt should be positioned in the hole towards the engine), and finally position the accelerator pedal by screwing in the nuts.


Posted on 20 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the cabin filter on the Ford Focus located? Read Answer
    • Focus 2004-2011 - Where is the cabin air filter located on the Ford Focus MK2? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus pollen filter located? Read Answer
    • Focus 2018-2025 - Where is the cabin filter located on my 2019 Ford Focus? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus 1.6 cabin air filter located? Read Answer
    • Focus 1998-2004 - Where is the air conditioning cabin filter Ford Focus 3rd series Read Answer
    • Focus 1998-2004 - Where is the cabin filter of the Ford Focus I? Read Answer
    • Focus 2004-2011 - Where do you find the Ford Focus II cabin air filter? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos