Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the front hood of the Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019

Today we will explain how to open the front hood of the Ford Escape model produced from 2013 to 2019. To open the front hood, we need to press the button located just below the steering wheel. Once the button is pressed, the hood will open slightly and we should position ourselves in front of it to open it completely. We will then need to place our hand on the left inner part of the hood to move the yellow lever to the right, thus opening the hood. To close the hood, we should let it fall on itself and the automatic lock will close it. These same steps can also be followed for other Ford models.

Posted on 30 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the engine of the 2024 Ford Escape located?
Where is the fuse box of the engine of the 2024 Ford Escape located?
Ford Escape (2020-2026 / MK 4) If you want to find out where the fuse box of the engine of your new 2024 Ford Escape is located, all you have to do is read the following guide and …
How to open the rear hatch of the Ford Escape from the inside.
How to open the rear hatch of the Ford Escape from the inside.
Ford Escape (2013-2019 / MK 3) In this guide, we will see the instructions that will allow us to open the rear hatch of the Ford Escape from the inside, thus unlocking the closure.…
How to Install the Front License Plate on a Ford Escape
How to Install the Front License Plate on a Ford Escape
Ford Escape (2013-2019 / MK 3) Follow this brief guide to install the license plate holder and front license plate on your Ford Escape. First, move to the front of your vehicle and…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos