Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Ford Escape?

Model: Ford Escape MK 2 - Years: 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, you will see how to replace the cabin filter in a Ford Escape, a very simple and quick operation. The filter is located inside the engine compartment, on the passenger side.

First, open the hood and remove the plastic rivets securing the panel located in front of the windshield. Next, open the door below by unlocking the corresponding clips, remove the old filter, and clean the housing of any debris and dirt.

Finally, install the replacement by following the reverse procedure and ensuring it is positioned in the correct direction.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Ford Escape
How to Replace the Cabin Filter in the Ford Escape
Ford Escape (2008-2012 / MK 2) Replacing the cabin filter in the Ford Escape, as shown in this tutorial, is a very simple and quick task. First, open the hood, then locate the clip…
How to Replace the Cabin Air Filter of the Ford Escape
How to Replace the Cabin Air Filter of the Ford Escape
Ford Escape (2013-2019 / MK 3) Unlike many other car models, in the Ford Escape, the cabin air filter is not located inside the passenger glove compartment but in the engine compar…
How to Replace the Cabin Air Filter in a Ford Escape?
How to Replace the Cabin Air Filter in a Ford Escape?
Ford Escape (2013-2019 / MK 3) This video shows how to replace the cabin air filter in a Ford Escape, a very simple and quick operation. The filter is located in the corner between…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos