Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Ford Escape?

Model: Ford Escape MK 3 - Years 2013-2019
Part: Cabin air filter

This video shows how to replace the cabin air filter in a Ford Escape, a very simple and quick operation. The filter is located in the corner between the center console and the footrest on the passenger side. First, detach the panel from the bottom of the glove compartment, then unscrew the fastening screw of the door, open it, and remove the old filter. At this point, insert the new filter, making sure it is oriented correctly, as indicated on the filter itself. Reposition the door and snap the glove compartment panel back onto the corresponding pins.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in a Ford Escape?
How to Replace the Cabin Filter in a Ford Escape?
Ford Escape (2008-2012 / MK 2) In this tutorial, you will see how to replace the cabin filter in a Ford Escape, a very simple and quick operation. The filter is located inside the …
How to Replace the Cabin Filter on a Ford Escape?
How to Replace the Cabin Filter on a Ford Escape?
Ford Escape (2013-2019 / MK 3) To replace the cabin filter on a Ford Escape, access the lower part of the glove compartment on the passenger side to completely detach the carpet. U…
How to Replace the Cabin Filter in the Ford Escape
How to Replace the Cabin Filter in the Ford Escape
Ford Escape (2008-2012 / MK 2) Replacing the cabin filter in the Ford Escape, as shown in this tutorial, is a very simple and quick task. First, open the hood, then locate the clip…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos