Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Ford Escape?

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

See other generations:
Video tutorial

In this tutorial, you will see how to replace the air filter in a Ford Escape, a very simple and quick operation. After obtaining the correct replacement part, which is easily available online, open the hood and locate the airbox on the driver's side.

At this point, using a 8mm socket wrench, remove all the fastening screws along the perimeter of the box, lift the top part, and remove the old filter. If necessary, clean the inside thoroughly and insert the new part, reassembling everything by following the exact reverse procedure.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter of the Ford Escape
Replacing the Air Filter of the Ford Escape
Ford Escape (2008-2012 / MK 2) In this video tutorial, see how to remove and replace the engine air filter of the Ford Escape V6 in simple and quick steps. First, open the hood and…
Replacing the Cabin Air Filter on the Ford Escape
Replacing the Cabin Air Filter on the Ford Escape
Ford Escape (2008-2012 / MK 2) In today's video, we will see how to remove and replace the cabin air filter on the Ford Escape, following the instructions below. First, open the ho…
How to Replace the Cabin Air Filter of the Ford Escape
How to Replace the Cabin Air Filter of the Ford Escape
Ford Escape (2013-2019 / MK 3) Unlike many other car models, in the Ford Escape, the cabin air filter is not located inside the passenger glove compartment but in the engine compar…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos