Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Ford Focus MK3 remote control

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

In this video, we will see how to change the battery of the Ford Focus MK3 remote control: first, we need to separate the two halves of the remote control in order to access the battery compartment; we can do this with a small screwdriver, with which we will pry apart the two halves of the shell.

In one of the halves of the shell itself, we will find the button battery, which is a common CR2032, that can be easily found at any supermarket or electronics store.

When we put the new battery back in place, pay attention to the polarity - the side with the code should be facing towards us - and then close the shell and it's done.


Posted on 17 January 2025 by ScegliAuto


Related tutorials

How do you replace the battery of the Ford Focus remote control?
How do you replace the battery of the Ford Focus remote control?
Ford Focus (2011-2018 / MK 3) To replace the battery of the Ford Focus remote control, you need to pry with an object like a screwdriver at the bottom of the device: by doing so, …
How to Replace the Remote Battery of the Ford Focus?
How to Replace the Remote Battery of the Ford Focus?
Ford Focus (2011-2018 / MK 3) When the remote for your Ford Focus stops working, the cause is almost always a flat battery. To replace the remote battery of a Ford Focus, you must…
How to Replace the Remote Battery on a Ford Focus
How to Replace the Remote Battery on a Ford Focus
Ford Focus (2011-2018 / MK 3) Replace the remote battery on a Ford Focus by prying open the side of the device: once done, you can detach the top half of the casing from the botto…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos