Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the handbrake lever of the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Parking brake

See other generations:
Video tutorial

Below we will see the main instructions that will allow us to adjust the handbrake lever of the Ford Focus. First of all, we get on board the car and start by removing the handbrake boot, unclipping it on the sides; then we use a socket wrench to tighten the nut of the handbrake cable, pulling it to reduce the lever travel, as shown in the video.

In order for this operation to be successful, it is necessary that the brakes and pads are in good condition; in general, the handbrake lever should not make more than five clicks.


Posted on 28 February 2025 by ScegliAuto


Related tutorials

How to Adjust the Handbrake Lever on the Ford Focus
How to Adjust the Handbrake Lever on the Ford Focus
Ford Focus (1998-2004 / MK 1) Follow these instructions to adjust the travel of the handbrake lever on the Ford Focus. First, get inside the vehicle and remove the cover of the ha…
How to adjust the handbrake lever on the Ford Focus
How to adjust the handbrake lever on the Ford Focus
Ford Focus (1998-2004 / MK 1) To adjust the travel of the handbrake lever on a Ford Focus, start by releasing the handbrake; stay inside the cabin, remove the lever gaiter by dise…
How to adjust the handbrake of the 2002 Ford Focus
How to adjust the handbrake of the 2002 Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will explain how to adjust the handbrake of a 2002 Ford Focus on your own. To adjust the handbrake on this type of vehicle, we need to remov…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos