Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Air Filter on Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin air filter on this car model is not a straightforward task as the filter is located just behind the centre console, but to access it, some trim elements need to be removed. Start by disengaging the trim at the base of the gear lever gaiter, then detach the rear covering of the tunnel to allow the removal of the trim on the passenger side of the tunnel.

At this point, the cap of the filter container will be visible; to remove it, you must also take off the panel located just below the glove compartment. Only now can you replace the filter.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) To access the cabin air filter (or pollen filter) on a Ford Ecosport, work in the area beneath the glove compartment. Start by unscrewing the screw f…
Replacement of the cabin air filter of the Ford Ecosport
Replacement of the cabin air filter of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) The following steps will allow us to disassemble and replace the cabin air filter of the Ford Ecosport. First, we get into the car and start by remov…
How to Replace the Cabin Air Filter on a Ford EcoSport Mk1
How to Replace the Cabin Air Filter on a Ford EcoSport Mk1
Ford Ecosport (2012-2023 / BK, MK 1) This guide shows how to remove and clean the cabin filter of the Ford EcoSport Mk1. First, move the passenger seat all the way back and detach the cl…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos