|
Do it yourself
| |||
| ||||
How to change the cabin air filter on the Ford Ecosport MK1
Model: Ford Ecosport
Bv226
- Years 2003-2012
In this video we can see how to change the cabin air filter on a Ford Ecosport MK1: it is not very simple, we will have to remove several panels, starting from the passenger footwell panel, with the T30 torx screwdriver found at the bottom; then we will remove the T25 torx screwdriver located at the base of the glove box, where it will not be necessary to disconnect the electrical connector. To remove the glove box now, simply press the two sides towards the center and pull away. Now we need to remove the plastic clips. Now pull back the footwell panel, in order to access the two T20 screws that allow us to open the cover and remove the air filter. Clean the glove box well from dust and residue and place the new and clean filter in its place, paying attention to the installation direction. Now all that's left is to close everything and reassemble the glove box, following the instructions in reverse.
Posted on 17 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Ford Ecosport
(2012-2023 /
BK, MK 1)
The following steps will allow us to disassemble and replace the cabin air filter of the Ford Ecosport. First, we get into the car and start by remov…
Ford Ecosport
(2012-2023 /
BK, MK 1)
Watch this short video to learn how to remove and replace the cabin air filter on the Ford Ecosport, following the instructions below. First, get ins…
Ford Ecosport
(2012-2023 /
BK, MK 1)
To access the cabin air filter (or pollen filter) on a Ford Ecosport, work in the area beneath the glove compartment. Start by unscrewing the screw f…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.483
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |