Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Air Filter on Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Cabin air filter

To access the cabin air filter (or pollen filter) on a Ford Ecosport, work in the area beneath the glove compartment. Start by unscrewing the screw facing the centre tunnel and remove the panel attached to it: perform this operation slowly as the working space is tight, and be careful not to damage the clips. Next, unscrew the screws holding the protective grille and remove it. Take out the pollen filter from its compartment and insert the new filter in the correct orientation. Reassemble everything in reverse order.

Updated on 4 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the cabin air filter of the Ford Ecosport
Replacement of the cabin air filter of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) The following steps will allow us to disassemble and replace the cabin air filter of the Ford Ecosport. First, we get into the car and start by remov…
Replacement of the cabin air filter of the Ford Ecosport
Replacement of the cabin air filter of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) These brief instructions will show us how to disassemble and replace the cabin air filter of the Ford Ecosport. First of all, we get into the car and…
Replacing the Pollen Filter on a Ford Ecosport
Replacing the Pollen Filter on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Access the front passenger seat footwell, working in a rather awkward position. Unclip the lower clips of the glove compartment as shown in the video…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos