Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

Watch this short video to learn how to remove and replace the cabin air filter on the Ford Ecosport, following the instructions below. First, get inside the vehicle on the passenger side and start by removing the plastic cover of the gear lever; use a Torx spanner to unscrew the screw of the side panel to access the air filter box compartment, as shown in the video.

At this point, unscrew the screws securing the cover and then remove the filter inside; simply replace it with the new one, ensuring it is inserted in the correct direction!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Replacement of the cabin air filter of the Ford Ecosport
Replacement of the cabin air filter of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) The following steps will allow us to disassemble and replace the cabin air filter of the Ford Ecosport. First, we get into the car and start by remov…
Replacing Cabin Air Filter on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) To access the cabin air filter (or pollen filter) on a Ford Ecosport, work in the area beneath the glove compartment. Start by unscrewing the screw f…
How to replace the air filter in a Ford Ecosport
How to replace the air filter in a Ford Ecosport
Ford Ecosport (2003-2012 / Bv226) Replacing the engine air filter in your first-generation Ford Ecosport takes just a few minutes. With the steps outlined in this guide, you can compl…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos