Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Damaged Tyre on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Wheel

See other generations:
Video tutorial

In this video, learn how to replace a damaged tyre on a Ford Focus. Open the boot and take out the wheel removal kit, which includes: jack, jack lever, screwdriver, wheel nut wrench, telescopic wrench, and spare wheel.

Position the jack under the jacking point of the vehicle, which is under the sturdiest part of the chassis to avoid bending the metal due to excessive weight. Lift the car slightly and loosen the wheel nuts.

Now, raise the car with the jack lever, unscrew the nuts, and pull the wheel off the hub. Mount the new rim onto the hub (the spare wheel is located under the vehicle body; lower it to the ground using the handy kit in the boot) with the respective nuts.

Always remember to store the removal kit with all its parts back in the boot.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

Where is the Ignition Fuse on a Ford Focus?
Where is the Ignition Fuse on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) If the ignition button on the Ford Focus is not functioning, it is necessary to replace the fuse. The fuse related to its operation is located inside…
How to Replace the Rear Shock Absorbers on a Ford Focus
How to Replace the Rear Shock Absorbers on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In today's video, you will see a maintenance operation that you can carry out independently, saving you a considerable amount of money. Specifically,…
Removing the Headlight on Ford Focus
Removing the Headlight on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to remove the front headlight from the Ford Focus? The headlight is secured with retaining screws, so let’s see how to do it. Unscrew the retain…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos