Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light bulb

The replacement of the rear headlight bulb of a Ford Focus can be done easily and quickly by following a few simple steps using a simple Phillips screwdriver. Open the trunk and unscrew the side screws of the headlight using the Phillips screwdriver. Remove the headlight from its housing, being careful not to damage the wiring. Disconnect the connector from the headlight to remove it completely so that we can replace the headlight if necessary or open the dome light to replace the bulbs. After replacing the bulbs, close the dome light, reconnect the connector, and place the headlight back into its housing. Screw in the screws and test the lights to make sure they are working properly.

Posted on 26 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Ford Focus
How to replace the rear headlight bulb of the Ford Focus
Ford Focus (2004-2011 / Focus 2, MK 2) .. Today we will explain how to replace the rear headlight bulb of the Ford Focus. First, open the trunk of the vehicle and then.. …
How do you replace the rear headlight bulb of the Ford Focus?
How do you replace the rear headlight bulb of the Ford Focus?
Ford Focus (1998-2004 / MK 1) The replacement of the rear headlight bulb of the Ford Focus is carried out by opening the rear hatch, so that it is possible to access the screw loc…
How to replace the rear headlight bulb of the Ford Focus 4
How to replace the rear headlight bulb of the Ford Focus 4
Ford Focus (2018-2025 / MK 4) .. Today we will explain how to replace the rear headlight bulb of the Ford Focus 4. We open the trunk of the vehicle and remove.. …

Other guides you may be interested in

How to Remove the Distributor from a Fiat Panda

How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, remove the engine soundproofing panel and the cap (detach it). Start by unscrewing the fastening pins of the distributor (as shown in the video); remove the distributor from the engine housing. Install a new distributor inside the engine bay, connect the various cables and close with the cap. Refit all previously removed parts (soundproofing panel, filter, etc.) and test the correct operation.

Watch the video!


by ScegliAuto

More videos