Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear taillight of a Transit MK7?

Model: Ford Transit MK 7 - Years 2006-2014
Part: Tail light

In this video we can see how to change the rear light of a Ford Transit MK7: opening the rear door, we notice two rubber caps on the pillar. These are the ones that hide the screws that hold the rear light unit. Remove them and pull out the entire light from the outside, being careful with the wiring that is connected; disconnect the electrical connectors and remove the part containing the bulbs, if still in good condition. We can find the pair of lights for example on Amazon with the code B0BRNLMBSG at the price of 56.89 euros per pair, free delivery. Now we put back the part containing the bulbs, clean the connectors with compressed air and reconnect them. Put the light back in place and tighten the security screws. Job done.

Posted on 24 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear headlight bulbs of the Ford Transit Custom
Replacement of the rear headlight bulbs of the Ford Transit Custom
Ford Transit (2014-2024 / MK 8) Following these short and simple steps, we will see how to disassemble and replace the rear headlight bulbs of the Ford Transit Custom. First, open t…
Removing the Front Headlamp of a Ford Transit
Removing the Front Headlamp of a Ford Transit
Ford Transit (2006-2014 / MK 7) In this video tutorial, you will learn how to remove the front headlamp of a first-generation Ford Transit. First, open the bonnet of the vehicle and…
How to Replace the Front Headlamp Bulb on the Ford Transit MK7
How to Replace the Front Headlamp Bulb on the Ford Transit MK7
Ford Transit (2006-2014 / MK 7) In today's video, you will see how to remove and replace the front headlamp bulb on the seventh generation Ford Transit in simple and quick steps. Fi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos