Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the headlight assembly of a Ford Focus MK3

Model: Ford Focus MK 3 - Years 2011-2018
Part: Headlight

In this video, we will see how to remove the front headlight assembly of a Ford Focus MK3: in this case, it is the left headlight, but we can proceed in the same way for the right headlight. On the body, on the right side, we will find two screws to remove, which are Torx screws of 30 mm. Once these screws are removed, we need to take the headlight from the right side and gently pull it up. We will see a tab, which we need to be careful to put back in place when it is time to reposition the headlight. Then, using a flathead screwdriver, we help to disconnect the electrical connector, and at this point, the headlight is completely in our hands.

Posted on 14 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Ford Focus
Replacement of the front headlight bulb of the Ford Focus
Ford Focus (2011-2018 / MK 3) Below we will discover the instructions that will allow us to disassemble and replace the headlight bulb of the Ford Focus. First, we open the hood o…
How to Replace the Rear Light on the Ford Focus MK3
How to Replace the Rear Light on the Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In this video, learn how to replace the rear light on the Ford Focus MK3: open the tailgate and remove a small piece of trim designed specifically fo…
Disassembly of the front headlight and bulbs of the Ford Focus
Disassembly of the front headlight and bulbs of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's instructions will show us the procedure for disassembling and replacing the front headlight and its bulbs of the Ford Focus. First, we open t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos