Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery of a Ford Escape with a 48 AGM group

Model: Ford Escape MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

In this video, we can see how the owner of this Ford Escape replaced his 12-volt battery, which often went dead, with a 48-volt AGM group. The battery of the Ford Escape is located in the trunk, bolted under the spare tire, which must be removed.

Once removed, we must of course disconnect the negative pole of the battery before proceeding with other operations, then we can remove the metal plate that secures the battery to the frame of the car. The battery is then secured by two additional bolts.

The new one we are going to install is larger, so we will need to open the hole for fixing it in the furthest position.

Let's secure it, reconnect it, and secure it with the metal bracket. Now we can put the spare tire and the trunk floor back in place.


Posted on 18 July 2025 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a 2014 Ford Escape
How to Replace the Headlight Bulb on a 2014 Ford Escape
Ford Escape (2013-2019 / MK 3) If you are wondering how to properly replace the headlight bulb on your 2014 Ford Escape, follow the steps outlined in this guide. First, completely …
How to Replace the Battery in a 2019 Ford Escape Key
How to Replace the Battery in a 2019 Ford Escape Key
Ford Escape (2013-2019 / MK 3) In this guide, you will learn how to replace the battery inside your 2019 Ford Escape key. First, fully remove the physical emergency key and then us…
Where to Find the Fuse Box of the Ford Escape
Where to Find the Fuse Box of the Ford Escape
Ford Escape (2008-2012 / MK 2) If you don't know where the fuse box of your Ford Escape is located, don't worry because this mini guide has all the necessary information. Also, rem…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos