Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the rear spoiler on the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018

In this guide, we will see the instructions that will allow us to install the rear spoiler on the Ford Focus. First, we open the rear hatch of the trunk and start by disassembling and removing the third brake light, unscrewing the fixing screws and disconnecting the electrical connector; then we unscrew the additional screws for the spoiler, properly fixing it, as shown in the video. At this point, we make the electrical connection of the third brake light fixed on the spoiler, checking its operation, following the video tutorial to the end!

Posted on 18 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear spoiler of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Below we will see the instructions that will allow us to disassemble and replace the rear spoiler of the Ford Focus. First, we open the rear hatch of…
How to Remove the Rear Spoiler on a Ford Focus
How to Remove the Rear Spoiler on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides instructions for removing the rear spoiler on a Ford Focus in simple and quick steps. First, open the rear tailgate and start rem…
How to Replace the Rear Wiper on a Ford Focus
How to Replace the Rear Wiper on a Ford Focus
Ford Focus (2018-2025 / MK 4) In this guide, we will explain step by step how to correctly replace the rear wiper on your latest Ford Focus. First, purchase a new rear wiper that …

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos