Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear taillight and stop light of the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Tail light

In this video, we will see how to remove the rear taillight and stop light of the Ford Ecosport: we open the tailgate, and in the trunk, we see that there is an opening in the upholstery corresponding to the rear light, which we need to lift. Inside there are two plastic knobs that need to be turned clockwise to be removed. Once this operation is done, we can pull the entire optical group outwards. At this point, holding the rear light, we remove the two screws in the center. In order to reach the bulbs that we intend to change, remember to never touch the new one with bare hands. We then proceed in reverse to put everything back in place.

Posted on 21 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Light Bulbs on the Ford EcoSport?
How to Replace the Brake Light Bulbs on the Ford EcoSport?
Ford Ecosport (2012-2023 / BK, MK 1) In this tutorial, you will see how to replace the brake light bulbs on the Ford EcoSport, a very simple and quick operation. Before proceeding, ensur…
How do you open the rear tailgate of the Ford Ecosport?
How do you open the rear tailgate of the Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) A question that often arises is: how do you open the rear hatch of the Ford Ecosport? In fact, it does not open from the handle located under the lic…
How to Permanently Disable the Start&Stop on the Ford Ecosport?
How to Permanently Disable the Start&Stop on the Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) To permanently disable the Start&Stop feature on the Ford Ecosport, you need to install a module that automatically remembers the last position of th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos