Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Ford Ecosport?

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Tail light bulb

To replace the rear light bulb on a Ford Ecosport, open the rear tailgate to access the side screws of the corresponding light. These screws can be loosened to free the light from its housing. The light must then be disconnected from the relevant connectors to extract the bulb inside. After removing the old bulb, connect the new one, insert it back into the light, and refit the light into its housing.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Headlamp Bulb on a Ford Ecosport
How to Change the Rear Headlamp Bulb on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) How to change the rear headlamp bulb on a Ford Ecosport? This operation is very simple; follow these steps to remove the headlamp. Open the boot lid;…
How to Replace the Rear Light Bulb on a Ford Ecosport
How to Replace the Rear Light Bulb on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you start, open the tailgate of your Ford Ecosport. Begin by moving the side carpet in the boot, then unscrew and remove the screw that secure…
How to Replace the Fog Light Bulb on a Ford EcoSport?
How to Replace the Fog Light Bulb on a Ford EcoSport?
Ford Ecosport (2012-2023 / BK, MK 1) To replace the fog light bulb on a Ford EcoSport, lift the bonnet to access the components inside the engine bay. Inside the front bumper, locate the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos