Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the windscreen wiper lever of the Ford Fiesta MK7

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Windshield wipers

See other generations:
Video tutorial

How to replace the windshield wiper lever of the Ford Fiesta MK7: press the tab and gently pull the lever outward; remove the plastic cover by inserting a screwdriver between the clips and levering it, but be careful, as some clips may break if forced too hard.

If our Fiesta has steering wheel controls or electrical controls, locate the electrical connector and disconnect it before completely removing the lever.

The price of the new lever varies greatly depending on whether or not you have these steering wheel controls, so we do not provide purchasing recommendations. Insert the new lever, aligning it with the steering column and pushing it until you hear a click; make sure the locking tab is fully inserted; reassemble the cover and reposition the plastic by pressing until all the clips snap into place.


Posted on 26 July 2025 by ScegliAuto


Related tutorials

Replacing Rear Wiper Motor on Ford Fiesta
Replacing Rear Wiper Motor on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Let's look at removing the rear wiper motor on a Ford Fiesta. Lift the tailgate, and remove the plastic cover under the rear window on the inside to …
Replacing the Rear Wiper on a Ford Fiesta
Replacing the Rear Wiper on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today's video, you will see how to remove and replace the rear wiper on a Ford Fiesta, a procedure that can be applied to most mid-range cars. Fir…
How to Replace the Wiper Blades on a Ford Fiesta
How to Replace the Wiper Blades on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you will see how to replace the wiper blades on a Ford Fiesta by following a few simple steps: first, purchase new wiper blad…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos