Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the fuel filter on a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Diesel fuel filter

See other generations:
Video tutorial

In this video, we see how to change the fuel filter on a Ford Focus MK2: we open the hood and remove the engine cover, remove the protective bracket on the filter, then the three fixing nuts on the filter itself, disconnect the electrical connector, then remove the inlet and outlet hoses of the filter: we can remove the filter.

Let's replace it, put back the hoses in place, reconnect the electrical connector and secure the filter in place with the fixing bolts.

Put back the bracket and then we can put back the engine cover. Job done.


Posted on 2 September 2025 by ScegliAuto


Related tutorials

Replace Fuel Filter on Ford Focus
Replace Fuel Filter on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let’s see how to replace the fuel filter on a Ford Focus. The filter is located under the car floor, so lift the car with a jack. Disconnect the wire…
Removing Fuel Filter from Ford Focus
Removing Fuel Filter from Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Remove the fuel filter on the Focus. Lift the car to access the fuel filter located under the vehicle's floor. Unscrew the retaining bolts near the c…
Removing Fuel Filter on Ford Focus
Removing Fuel Filter on Ford Focus
Ford Focus (1998-2004 / MK 1) Let's see how to remove the fuel filter on a Ford Focus. Lift the car to access the fuel filter located under the vehicle's floor. Unscrew the retain…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos