Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of a Ford Transit mk8

Model: Ford Transit MK 8 - Years 2014-2024
Part: Front bumper

In this video we can see how to disassemble the front bumper of the Ford Transit MK8: the first thing to do is to remove the side molding from the outside of the wheel arch, which is only fixed by clips. Both headlights will also need to be removed, which are attached at the top with two bolts and at the bottom with a clip. As for the bumper itself, there are bolts to be removed at the top, others on the side, which we will easily access after removing the headlights. One slightly hidden bolt is in the corner next to the fender. Then, of course, there are many clips to be removed carefully to avoid breaking them. At the bottom of the bumper there are other bolts and clips, and two more where the license plate is attached. Once everything is removed, we will need to lift upwards and then pull towards us, and we will discover that there are still four clips under the headlights to be released.

Posted on 17 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper Grille of the Ford Transit Mk8
How to Remove the Front Bumper Grille of the Ford Transit Mk8
Ford Transit (2014-2024 / MK 8) In this video tutorial, you will learn how to remove and replace the front grille of the Ford Transit Mk8 bumper by following these simple and quick …
How to Replace the Rear Bumper of the Ford Transit?
How to Replace the Rear Bumper of the Ford Transit?
Ford Transit (2014-2024 / MK 8) To replace the rear bumper of the Ford Transit, open the rear doors to access the screws on the top of the bumper. Next, loosen the screws securing t…
How do you replace the front bumper on a 2020 Ford Transit?
How do you replace the front bumper on a 2020 Ford Transit?
Ford Transit (2014-2024 / MK 8) Don't worry, replacing the front bumper of a Ford Transit is not complicated, but it requires attention. First of all, lift the vehicle with a jack t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos