Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the Ford Ecosport.

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Door trim panel

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and remove the door panel of the Ford Ecosport. First, let's open the front door of the vehicle and start by removing the plastic cover of the panel, as well as the cover of the grab handle; then we will unscrew the screws of the panel and disconnect the electrical connector of the window switch, as shown in the video.

At this point, we will pry on the sides to detach and remove the door panel, disconnecting the handle cable; finally, we will reassemble the door trim, connecting the window switch.


Posted on 2 December 2025 by ScegliAuto


Related tutorials

How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…
How to Remove the Rear Door Panel of a Ford Ecosport
How to Remove the Rear Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the rear door of your Ford Ecosport. Begin by disengaging and removing the inserts from the door panel. Next, unscrew and …
How to Remove the Door Panel on a Ford Ecosport
How to Remove the Door Panel on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Learn how to remove the door panel on a Ford Ecosport: disconnect the battery terminals located in the engine bay, and use a screwdriver to unscrew t…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos